Product

“R-SF6” - Sulfur Hexafluoride Heating Pneumatic Cart

  • peculiarity/
  • function/
  • parameter
  • Trolley structure
    Adopting trolley structure to be convenient for SF6 gas cylinders’ transportation. The carts tire adopts pneumatic tires, it can apply to more complex road, and with better cushioning effect.
     Electric heating circle in circular ring
    Gas cylinders’ fixed points adopt well-formed furnace structure and clasp closure, opening the clasp and pull out the active oven door then you can install the SF6 gas cylinders, it’s easy to operate. The internal furnace adopts two semicircle electric heating circle, close the hinge and lock the clamp to make the heating circle and gas cylinders touch tightly to get better heating effect.
    Built-in insulation cotton for heat insulation
    Here are built-in insulation cotton for heat insulation, to prevent people from electric heating circle diffusing heat, and meantime to protect the internal components.
    Autoinflation controlled by electron
    Adopting electronic circuit to test gas cylinders pressure and channel pressure, and realizing the control with aeration process through solenoid valve. When the gas in  cylinders is sufficient and gas in channel is unsatisfied, it will automatically control the solenoid valve to fill it; when detecting the full filled channel gas, the device will automatically stop inflating and alarm; when detecting the over low pressure of gas cylinders pressure, the device will automatically close the inflation valve and alarm.
    Electronic temperature control for automatic heating
    Adopting electronic temperature controller to automatically detect and display the body temperature, and it can control the gas cylinders circulation to automatically heat through the setting up/bottom limits by temperature controller.

     

  • “R-SF6” - Sulfur Hexafluoride Heating Pneumatic Cart is a kind of round-the-clock automatic heating pneumatic device for SF6 disconnector and composite apparatus. This device has combined with the transportation, heating and inflation these three functions, it can automatically monitor SF6 gas cylinders and channel’s related parameters to control the inflation. It has the features of convenient transportation, easy operation, intelligent control and reliability.

     

  • Accessory
    SF6 gas cylinders pressure gauge ( with low voltage contact): Contacting in the exit of gas cylinders, to measure the internal SF6 gas pressure.
    Inflated channel pressure gauge ( with over voltage contact):Contacting in the outside of reducing valve and the entrance of inflated channel, to measure the SF6 gas pressure of inflated channel.
    Inflation solenoid valve: Switching control using for inflation, controlled by DC24V.


    instructions

    ■ When the gas in cylinders is sufficient and gas in channel is unsatisfied, it will automatically control the solenoid valve to fill it.

    ■ when detecting the over low pressure of gas cylinders pressure, the device will automatically close the inflation valve and alarm.

    ■ when detecting the full filled channel gas, the device will automatically stop inflating and alarm.

    ■ During the inflation, when gas cylinders’ temperature is below the bottom limits, it will automatically start heating furnace to heat; when gas cylinders’ temperature is over the up limits, it will automatically close the heating furnace.

    ■ Press the switch “stutter stop”, it will close the whole power supply.

    ■ The switch “buzzer” is using for closing the buzzer.

     

© 2014 wuhan haomai electric power automation technology co., LTD/wuhan haomai photoelectric technology co.,
LTD ALL RIGHTS RESERVED
Hubei ICP for 05010718-1 Technical support;Hubei baijie   Halma's official weibo

24 hours service hotline13971234137

hotline400-099-8859

Share