Product

“RELAYTESTAR-6000D” - Optical Digital Relay Protection Tester

    24小时服务热线:1397 1234 137 / 400 099 8859

  • peculiarity/
  • function/
  • parameter
  • ·  Completed SC-PC: Equipped with 16 pairs of “100M-FX”SC-PC, 12 routes of FT3 transmission and reception, simulate 12 MU to carry out protective testing.

    ·  Unique twisted monitoring function: Equipped with output function of 1 route G network twisted, and can monitor the input&output data during the testing process. It can realize the digital multimeter function through connecting the laptop to the G network twisted.

    ·  Various standard messages: It can provide various messages suited for standard IEC61850-9-1/9-2/9-2LE、GOOSE、IEC60044-7/8 FT3 and FT3LE.

    ·  Output of collector: It can provide collector’s messages output from various manufacturers. family:Verdana'>GOOSE、IEC60044-7/8 FT3 and FT3LE.

    ·  Merging unit testing mode: Outputting the sampling value messages with collector FT3、FT3LE format, and simultaneously reading the messages of merging unit 9-2 or FT3, to test the merging unit’s ratio error and angular difference.

    ·  Network analyzer: Grab IEC 61850 or FT3 packets, display and record the data waveform, simulate frame loss and messy codes when outputting.

    ·  Small-signal output: 12 routes of small-signal analog output, to provide protective equipment testing aimed at small-signal input.

    ·  Optical digital signal testing: It can simulate the packet loss, messy code, SMV data error and provide GOOSE storm testing.

    ·  Visualized output waveform: Original stoping and wave record about 24 routes of output waveform, visual display and digitally record the output waveform from local or external equipment. Having solved the problems that digital protection cannot be directly tested and displayed the waveform.

    ·   Completely resolve the protective model file: Completely resolve the SCL(SCD、ICD、CID)files, to realize the automatic configuration about SV、GOOSE information. It can flexibly and easily protect the interface with every types.

    ·  Various time mode: It can use second pulse, IRIG-B code or IEEE1588 for timing.

    ·  Built-in GPS module: Directly control by GPS,it can carry out bilaterally timing synchronous testing and fiber-optical current differential protection testing.

    ·  Strong compatibility: Same testing interface style and operating habits with the traditional relay protection tester, easy for testers to get started.

    ·  Dual-operation mode: Built-in IPC, support the stand-alone operation and online operation, completely same function with the two way, that’s the real dual-operation mode.

     

     

     
  •    IEC 61850 is the unique national standard about intelligent converting station automatic system based on network communication platform. This standard make it possible for information sharing and inter-operation between the different intelligent electrical equipment. As for an optical digital relay protection tester completely suits for the standard IEC 61850, it provides a complete testing project for the relay protection automatic equipment based on this standard.

  • Ethernet Communication Interface

     
        Type: 10/100Base-TX(10/100Mbit, twisted pair, automatic cross)
     
        Port quantity: 2 ports
     
        Interface type: RJ45
    Optical-fiber Communication Interface
     
        Type: 100Base-FX(100Mbit, optical-fiber, full duplex)
     
        Port quantity: 16 pairs
     
        Interface type: ST
     
        Optical cable type: 62.5/125µm (multimode optical fiber)
     
        Wavelength: 850nm
    Small-signal Analog Output
     
        Output channel: 12 routes
     
        Output range: AC:0~7Vrms
     
        Output accuracy: <0.05%
    Switching value input
     
        Quantity: 10 routes
     
        Features: electrification or idle contact self-adaption
    Switching value output
     
        Quantity: 4 routes
     
        Capacity: AC250V/0.5A DC250V/0.2A
     
© 2014 wuhan haomai electric power automation technology co., LTD/wuhan haomai photoelectric technology co.,
LTD ALL RIGHTS RESERVED
Hubei ICP for 05010718-1 Technical support;Hubei baijie   Halma's official weibo

24 hours service hotline13971234137

hotline400-099-8859

Share